![]() Source file for version 1 is avalalble in the repostiory. OLED cover should be cut from transparent acrylic. But they need to be long enough to fix a 1.6mm thick PCB to the spacer and short enough so two of them can fit in one spacer (might be trickier with 4mm spacers for Choc switches) I used some I had in my stock so I am not going to tell you exact length. 20 are going to hold the boards together (via spacers). Another 4 would be needed to hold transparent OLED cover but even though there are mounting holes in the PCB. I used brass ones but you can also buy nicer from anodised aluminium. I was not able to get 7mm, but 6mm worked well for me with MX switches. A build guide Lily58 Pro suggests 4mm for Choc and 7mm for MX. Their height depends on which switches you use. 10 are going to hold the bottom and the top together. TRS should work 1 if you stick with Serial. There’s also a reset key on default layout so as long as you have firmware flashed and working you shouldn’t need reset button on the board. Technically optional: you can use metal tweezers whenever you need to reset the microcontroller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
February 2023
Categories |